Women in Robotics, Human Science and Technology (1)-3
Event Date: 2006-03-07 14:00
| Date: 2006.3.7 (Tue) 14:00-14:30
Speaker: Keiko Homma
Author: Keiko Homma
Title: Motion Assist Devices for Rehabilitation using Parallel Wire Mechanisms
Keywords: rehabilitation robot, motion assist device, parallel wire mechanism
Type: Organized Session
Affiliation: National Institute of Advanced Industrial Science and Technology (AIST)
Position: Senior research scientist
Collaborator: Professor Mariko Usuba (Tsukuba University of Technology)
Disciplines: robotics/mechatronics, rehabilitation engineering, ergonomics
Societies and Conferences: The Robotics Society of Japan (RSJ), The Society of Instrument and Control Engineers (SICE), The Society of Life Support Technology, The Japan Society for Precision Engineering (JSPE), Society of Biomechanisms Japan (SOBIM)
Bibliography: Keiko Homma, "Motion Assist Devices for Rehabilitationusing Parallel Wire Mechanisms", Intelligent Autonomous Systems 9 T. Arai et al. (Eds.) IOS Press, pp.981--990, 2006.
Abstract:
In Japan, robotic systems for rehabilitation or assistance of the elderly and the disabled people are actively studied recently. In developing rehabilitation/assistive robots, safety is one of the most important issues, since the robots work very closely to the users or worn by the users. Parallel wire mechanisms have prospects of giving solutions to safety issues on rehabilitation robots. In this paper, the author takes a look back on her studies on motion assist devices using parallel wire mechanisms and discusses advantages and disadvantages of the motion assist devices using parallel wire mechanisms.
References:
[1] W.S. Harwin, T. Rahman and R.A. Foulds, "A Review of Design Issues in Rehabilitation Robotics with Reference to North American Research", IEEE Transactions on Rehabilitation Engineering, Vol. 3, No. 1, pp.3-13, 1995.
[2] A. Yardley, G. Parrini, D. Carus, and J. Thorpe, "Development of an Upper Limb Orthotic Exercise System", Proc. of International Conference on Rehabilitation Robotics, pp. 59 - 62, 1997.
[3] K. Kiguchi, M.H. Rahman and T. Yamaguchi, "Adaptation Strategy for the 3DOF Exoskeleton for Upper-Limb Motion Assist", Proceedings of the 2005 IEEE International Conference on Robotics and Automation, pp.2307-2312, 2005.
[4] S. Lee and Y. Sankai, "Power Assist Control for Walking Aid with HAL-3 Based on EMG and Impedance Adjustment around Knee Joint", Proceedings of 2002 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.1499-1504, 2002.
[5] J.W. Wheeler, H.I. Krebs and N. Hogan, "An Ankle Robot for a Modular Gait Rehabilitation System", Proceedings of 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.1680-1684, 2004.
[6] J. Nikitczuk, B. Weinberg and C. Mavroidis, "Rehabilitative Knee Orthosis Driven by Electro-Rheological Fluid Based Actuators", Proceedings of the 2005 IEEE International Conference on Robotics and Automation, pp.2294-2300, 2005.
[7] R. Hirata, T. Sakaki, S. Okada, Z. Nakamoto, N. Hiraki, Y. Okajima, S. Uchida, Y. Tomita and T. Horiuchi, "BRMS:Bio-Responsive Motion System (Rehabilitation System for Stroke Patients)", Proceedings of 2002 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.1344-1348, 2002.
[8] H. Kobayashi, "Development of a Muscle Suit for Realizing All Motion of the Upper Limb", Proceedings of 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.1630-1635, 2004.
[9] D. Sasaki, T. Noritsugu and M. Takaiwa, "Development of Active Support Splint driven by Pneumatic Soft Actuator (ASSIST)", Proceedings of the 2005 IEEE International Conference on Robotics and Automation, pp.522-527, 2005.
[10] R. Bostelman, A. Jacoff, F. Proctor, T. Kramer and A. Wavering, "Cable-Based Reconfigurable Machines for Large Scale Manufacturing", Proceedings of the 2000 Japan-USA Symposium on Flexible Automation, 2000.
[11] H. Osumi, T. Arai and H. Asama, "Development of a Seven Degrees of Freedom Crane with Three Wires (1st Report) –Inverse Kinematics of the Crane–", Journal of the Japan Society for Precision Engineering, Vol. 59, No. 5, pp. 767-772, 1993 (written in Japanese).
[12] S. Kawamura, W. Choe, S. Tanaka and S.R. Pandian, "Development of an Ultrahigh Speed Robot FALCON using Wire Drive System", Proceedings of the 1995 IEEE International Conference on Robotics and Automation, pp.215-220, 1995.
[13] S. Tadokoro and S. Kobayashi, "A portable parallel motion platform for urban search and surveillance in disasters", Advanced Robotics, Vol. 16, No. 6, pp.537-540, 2002.
[14] D. Mayhew, B. Bachrach, W.Z. Rymer and R.F. Beer, "Development of the MACARM – a Novel Cable Robot for Upper Limb Neurorehabilitation–", Proceedings of the 2005 IEEE 9th International Conference on Rehabilitation Robotics, pp.299-302, 2005.
[15] K. Nagai, H. Hanafusa, Y. Takahashi, H. Bunki, I. Nakanishi, T. Yoshinaga, T. Ehara, "Development of a Power Assistive Device for Self-Supported Transfer Motion," Proceedings of IEEE/RSJ Conference on Intelligent Robots and Systems, pp. 1433-1438, 2002.
[16] D. Surdilovic, R. Bernhardt, T. Schmidt, J. Zhang, "STRING-MAN: A New Wire Robotic System for Gait Rehabilitation," Proceedings of the 8th International Conference on Rehabilitation Robotics, pp. 64-67, 2003.
[17] P. Arcara, L. Di Stefano, S. Mattoccia, C. Melchiorri and G. Vassura, "Perception of Depth Information by Means of a Wire-Actuated Haptic Interface", Proceedings of the 2000 IEEE International Conference on Robotics and Automation, pp.3443-3448, 2000.
[18] K. Homma and T. Arai, "Design of an Upper Limb Motion Assist System with Parallel Mechanism", Proc. of IEEE International Conference on Robotics and Automation, pp. 1302 - 1307, 1995.
[19] K. Homma and T. Arai, "Static Model for Upper Limb Motion Assist System", Proc. of International Conference on Advanced Robots, pp. 945 - 950, 1995.
[20] K. Homma, S. Hashino and T. Arai, "An Upper Limb Motion Assist System: Experiments with Arm Models, " Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.758-763, 1998.
[21] K. Homma, O. Fukuda, and Y. Nagata, "Study of a Wire-driven Leg Rehabilitation System," Proceedings of IEEE/RSJ Conference on Intelligent Robots and Systems, pp. 1451-1456, 2002.
[22] K. Homma, O. Fukuda, and Y. Nagata, "Development of Leg Rehabilitation Assistance," Journal of Robotics and Mechatronics, Vol.14, No.6, pp.589-596, 2002.
[23] K. Homma, O. Fukuda, J. Sugawara, Y. Nagata and M. Usuba, "A Wire-Driven Leg Rehabilitation System: Development of a 4-DOF Experimental System," Proceedings of the 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp.908-913, 2003.
[24] K. Homma, O. Fukuda, J. Sugawara, Y. Nagata and M. Usuba, "Study of a Wire-driven Leg Rehabilitation System - Development of a 2-dof system and extension to a 4-dof system -," Journal of the Society of Life Support Technology, Vol. 15, No. 4, pp.151-158, 2003 (written in Japanese).
[25] K. Homma, O. Fukuda, Y. Nagata and M. Usuba, "Study of a Wire-driven Leg Rehabilitation System — Human Subject Experiments using a 4-DOF Experimental System —," Proceedings of IEEE/RSJ Conference on Intelligent Robots and Systems, pp. 1668-1673, 2004. |
|